Test a network connection – if successful, ping returns the ip address.
PING [options] destination_host
-w timeout Timeout in milliseconds to wait for each reply.
-i TTL Time To Live.
-v TOS Type Of Service.
-a Resolve addresses to hostnames.
-n count Number of echo requests to send.
-t Ping the destination host until interrupted.
-l size Send buffer size.
-f Set Don&qt;&qt;t Fragment flag in packet.
-r count Record route for count hops.
-s count Timestamp for count hops.
-j host_list Loose source route along host_list.
-k host_list Strict source route along host_list.
destination_host The name of the remote hostA response of "Request timed out" means there was no response to the ping attempt in the default time period of one second.
If the latency of the response is more than one second. Use the -w option on the ping command to increase the time-out. For example, to allow responses within five seconds, use ping -w 5000.
A successful PING does NOT always return an &qt;errorlevel&qt; == 0
Therefore to reliably detect a successful ping – pipe the output into FIND and look for the text "TTL"
Note that "Reply" in the output of PING does not always indicate a positive response. You may receive a message from a router such as: Reply from 192.168.1.254: Destination Net Unreachable.
Four steps to test an IP connection with ping:
1) Ping the loopback address to verify that TCP/IP is installed and configured correctly on the local computer.
2) Ping the IP address of the local computer to verify that it was added to the network correctly.
3) Ping the IP address of the default gateway to verify that the default gateway is functioning and that you can communicate with a local host on the local network.
4) Ping the IP address of a remote host to verify that you can communicate through a router.
PING -n 1 -w 7500 Server_06
PING -w 7500 MyHost |find "TTL=" && ECHO MyHost found
PING -w 7500 MyHost |find "TTL=" || ECHO MyHost not found
PING -n 5 -w 7500 www.microsoft.com
PING -n 5 -w 7500 microsoft.comPING is named after the sound that a sonar makes.
Ping times below 10 milliseconds often have low accuracy.
A time of 10 milliseconds is roughly equal to a distance of 930 Miles, travelling a straight line route at the speed of light.